THE

SPRAWL

  •  
  •  
  •  
  • projectsTor Autocircuit

    Download tor-autocircuit-0.2.tar.gz
    Size 37.9 KB
    DateOctober 28th, 2010
    Version0.2

    Tor Autocircuit was developed to give users a finer control over Tor circuit creation. The tool exposes the functionality of TorCtl library which allows its users to control circuit length, speed, geolocation, and other parameters.

    In order to control the script, you must edit the source file and change the following default parameters in the Configuration section:

    # Number of circuits to build
    num_circs = 10
    
    # Do not use a country twice in a route 
    # [True --> unique, False --> same or None --> pass] 
    unique_countries    = True,
    
    # Configure max continent crossings in one path  
    # [integer number 0-n or None --> ContinentJumper/UniqueContinent]
    continent_crossings = 3,
    
    # Configure max ocean crossings in one path 
    # [integer number 0-n or None --> OceanJumper/UniqueOcean]
    ocean_crossings     = 1,
    
    # Specify countries for positions [single country code or None]
    entry_country       = None,
    
    # Specify countries for positions [single country code or None]
    middle_country      = None,
    
    # Specify countries for positions [single country code or None]
    exit_country        = None,
    
    # List of countries not to use in routes 
    # [(empty) list of country codes or None]
    excludes            = None
    
    # Number of hops in circuits
    pathlen       = 3,
    
    # True   - produces exits in an ordered fashion for a specific port.
    # False  - If uniform is set to True, exists will be produced in a uniform fashion,
    #      otherwise it produces exits in a bandwidth weighted fashion.
    order_exits   = False,
    
    # Maximum percentile requirement of bandwidth rankings to be included in the circuit
    percent_fast  = 100,
    
    # Minimum percentile requirement of bandwidth rankings to be included in the circuit
    percent_skip  = 0,
    
    # Minimum hop bandwidth
    min_bw        = 1024,
    
    # True   - the same router can't appear more than once in a path, otherwise no path restriction
    # False  - no two nodes from the same /16 subnet can be in the path and the same router can't 
    #          appear more than once in a path. Set to False when using percent_fast or percent_skip
    use_all_exits = False,
    
    # True   - produces nodes in the uniform distribution
    # False  - produces nodes in the bandwidth weighted distribution
    uniform       = False,
    
    # Name of the exit node or None
    use_exit      = None,
    
    # True   - entry node must have "Guard", "Valid", and "Running" flags set
    # False  - entry node must have "Valid" and "Running" flags set
    use_guards    = True,
    

    sprawlsimilar

    16 jan
    2010
    2600 magazine article

    My article on the Tor control protocol was published in the Winter 2009-2010 issue of the 2600 Magazine. Read more.

    tor nodes

    Download tor-nodes.py
    Size 372 bytes
    DateAugust 27th, 2011
    Version0.2

    Enumerates IP addresses of Tor nodes by querying Tor client. Read more.

    tor control protocol

    Tor implements a highly customizable control protocol which can be used to tune almost all aspects of its operation. In this article you will learn how to fine tune Tor client's operation, query runtime information, as well as create circuits of arbitrary size. Read more.


    sprawlcomments

    All original content on this site is copyright protected and licensed under Creative Commons - Attribution, NonCommercial, ShareAlike 4.0 International.

    π
    ///\oo/\\\